Electronics > Projects, Designs, and Technical Stuff
Help Identify a PCB socket
(1/1)
abqa:
Hi Guys

I need help identifying a 5pin socket on a PCB in a heatpump so I can find a matching connector for it. It looks to have a pitch of 2mm
I suspect it is a molex or similar but can't find any that look the same.

I had some 5pin JST PH connectors laying around which are the right length but too wide to fit in.

I was wonderign if someone recognises this connected (See attached image)
RES:
Looks like a PAP-05V / PAP-05V-S 2mm pitch 5 PIN PA JST connector.
abqa:
Thanks that looks like it could be correct! I thought I had checked all the JST connectors
I will order some and check
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod