Electronics > Projects, Designs, and Technical Stuff
Help Wanted! Pinout/Manual Of VAKO DISPALYS CL501/CS CRT Modual
(1/1)
TheEPROM9:
I have a VAKO DISPALYS CL501/CS CRT Display Modual. It is a really neat greenscreen display that I want to use for a retro computer project. However I have had 0% luck with this, I have however found the 12V power input & when I power it up the HV works as you can hear the 15KHz. However there is no raster on the display or any other sign of life.

I have tryed to find documentation on line but I have currently found nothing. I don't know if anyone has tips & tricks or has worked with these at some point as it is from 1988, or can help me reverce engineer it as I am not to familour with the nitty grity detailes CRT circitry.

Only IC Is UPC1031H2 Vertical Deflection Driver. The rest of the active comonets are transistors.

I have attached sevrail images to provide at least some context.
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod