Author Topic: Help with McMurdo Connector  (Read 234 times)

0 Members and 1 Guest are viewing this topic.

Offline ludzinc

  • Supporter
  • ****
  • Posts: 477
  • Country: au
    • My Misadventures In Engineering
Help with McMurdo Connector
« on: September 18, 2019, 04:33:20 am »
Hi All

Trying to find replacement plugs and sockets for the connector in the pics.

Data I have at work is that it is a "Plug 4 Way McMurdo OO4/PC 1169-12-02" but googling turns up nothing :(

Any ideas?

Thanks

Simon
« Last Edit: September 18, 2019, 05:59:48 am by ludzinc »
 

Offline Wendy_Preston

  • Contributor
  • Posts: 22
  • Country: gb
  • Marketing Engineer for Harwin
    • Harwin.com
Re: Help with McMurdo Connector
« Reply #1 on: September 20, 2019, 07:24:46 am »
Hi Ludzinc,

Here at Harwin we do a few products that line up with the ITW McMurdo ranges - but not this one, I'm afraid. It's not familiar to me at all. Probably the best people to assist are FC Lane Electronics. They took over a lot of the McMurdo range when McMurdo were bought out by ITW - you can see some details on that on this web page:
http://www.mcmurdoconnectors.com/

Their main site on current McMurdo products is here:
https://www.fclane.com/filter/products/manufacturer/itw-mcmurdo

They've been doing McMurdo stuff for a long time, so they are probably the best people to contact. Hope this helps!  :-+

Wendy
Content Marketing and website technical content for Harwin - contact me on webmaster@harwin.co.uk.
 

Offline ludzinc

  • Supporter
  • ****
  • Posts: 477
  • Country: au
    • My Misadventures In Engineering
Re: Help with McMurdo Connector
« Reply #2 on: September 24, 2019, 03:25:32 am »
Thanks very much - will reach out them!

Cheers,

Simon
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf