Electronics > Projects, Designs, and Technical Stuff
Help with extension connector used by JBC in equipment DI-1 DE-2 DME-4
(1/1)
netandino:
Good morning colleagues, I'm doing my station controllers for HAKKO and JBC, here is the driver example for 140W hakko that I made "is in Spanish" https://netandino.blogspot.com/2019/01/control-de-temperatura-para-cautin-con.html

Now I am with a doubt since I do not know which connector are these of JBC and I have a question for you, I hope you can help since I need to know the name and / or characteristics of the connectors used by JBC for extension of the JBC DI equipment. 1 DE-2 DME-4, attached images for more details

regards
tsman:
https://www.eevblog.com/forum/reviews/jbc-soldering-iron-stand-wiring/msg375934/#msg375934
netandino:
Hi, I searched for information on the link but there is information, just talk about the pins. I want the name and model of this connector.

that to use my bases or JBC stand with its original cables.

I have this stand  DN-SE https://www.jbctools.com/dn-se-stand-for-t210t245t470-na-product-1183.html

conector for:  Stand extension cable Ref. A1286  https://www.jbctools.com/a1286-kit-extension-lead-product-135.html
tsman:

--- Quote ---The connector on the station side is a binder series 678, Farnell order number 1122401.
--- End quote ---
You can see the Binder B logo on your connectors.
netandino:
Thanks for your support, I found the connector with these dates:

* Binder, 7 Pole Panel Mount Miniature Connector Socket, Female Contacts

* BINDER - 99 0622 00 07 - SOCKET, FREE, 7WAY , 678 SERIES
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod