AOYUE 8800 Desoldering Gun Electronics

[delta-9]

PCB Components list

BT134-600E Thyristor TRIAC 600V 4A TO-126
LM358P DIP-8
MOC3021 Random-Phase Optoisolators Triac Driver Output DIP-6
DB107 DIP 1A 1000V Rectifier Bridge
DB3 ST trigger diode
y2 250v x1 400v ceramic capacitor
100uF 16v Capacitor
46E 104J CBB capacitor
b203 potentiometer 20k
3362 potentiometer 10k
3362 potentiometer 500k
1N4007 Diode
FR107 Diode
20k Ohms 1%
390k Ohms 1%
240k Ohms 1%
1.5k Ohms 1%
8.2k Ohms 1%
15k Ohms 1%
2.7k Ohms 1%
100 Ohms 1%
470 Ohms 1%

I'm going to make a second 3d printed desoldering unit, based on the aoyue 8800. Using replacement C088 element/barrel/nozzle.

From what I can see, It looks like a two sided pcb. There is one small via bridging top and bottom trace.
all components are through hole.

I have enough parts to make 20 control boards, What I need is a duplicate of the original pcb in cadeagle. But have no experience with pcb design
Can anybody help me create a schematic.

Thankyou

[amyk]

If you're looking to just clone the board, there's really no need to make a schematic.