Electronics > Projects, Designs, and Technical Stuff
Home Appliance Testing/Recording Meter
mukulkhairatkar:
Hello All,
I am working on a Home appliance product which is almost finished. I need to record Voltage/Current/ Power and frequency for 24 hr cycle time. This data will be further used to optimized the system performance. Can you suggest my any meter or a device which I can hook up to the appliance and record all these parameters? The power requirement is 110V/60Hz/10A.
Any other method I can achieve this?
Thanks in advance
Mukul
Simon:
the simplest method would be an MCU that can interface to a pc to store the data with (that if your better at that sort of thing than me) current sensing circuitry attached to the MCU to get the signal into a 0-Vdd range
mukulkhairatkar:
I found this... But it is only in Australia.....I need one for USA
http://www.fluke.com/fluke/auen/Portable-Appliance-Tester/Fluke-6000-Series.htm?PID=56095
Mukul
Simon:
and i hate to think how much it costs
JohnS_AZ:
It's about $1,700 US
Navigation
[0] Message Index
[#] Next page
Go to full version