Author Topic: Automotive design rules in the USA  (Read 1770 times)

0 Members and 1 Guest are viewing this topic.

Offline Afrotechmods

  • Supporter
  • ****
  • Posts: 44
  • Country: 00
    • Afrotech
Automotive design rules in the USA
« on: October 08, 2011, 10:41:21 pm »
I've been asked to design an aftermarket product that would be installed in cars, buses and possibly trains. It would be used to filter power and provide power to various low powered peripherals that are not related to the automobile's normal functions. It's not going to be mounted near an engine compartment or anything harsh like that, and the client seems okay with 0-70ÂșC rated components seeing as everything it will be powering will be limited to that anyway.

Are there specific rules, laws or testing standards that need to be followed to launch such a product in the USA? And if so, could someone point me in the right direction?

Big thanks to anyone who has experience in this area!
« Last Edit: October 08, 2011, 10:50:37 pm by Afrotechmods »
 

Online IanB

  • Super Contributor
  • ***
  • Posts: 9764
  • Country: us
Re: Automotive design rules in the USA
« Reply #1 on: October 08, 2011, 10:44:47 pm »
You could probably make a start with Underwriters Laboratories: http://www.ul.com/global/eng/pages/
I'm not an EE--what am I doing here?
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf