| Electronics > Projects, Designs, and Technical Stuff |
| How to choose TVS diodes to dispel flyback surges from relay coils? |
| << < (5/7) > >> |
| NiHaoMike:
--- Quote from: calzap on February 08, 2020, 07:36:44 am ---I know essentially nothing about practical use of opto-coupled triacs. I'll have to educate myself. Thanks for the suggestion. --- End quote --- Those are better known as SSRs. |
| calzap:
--- Quote from: NiHaoMike on February 08, 2020, 01:35:22 pm --- --- Quote from: calzap on February 08, 2020, 07:36:44 am ---I know essentially nothing about practical use of opto-coupled triacs. I'll have to educate myself. Thanks for the suggestion. --- End quote --- Those are better known as SSRs. --- End quote --- OK. I was sleepy and should have realized that. :=\ Those I've used before. |
| DBecker:
--- Quote from: NiHaoMike on February 08, 2020, 01:35:22 pm --- --- Quote from: calzap on February 08, 2020, 07:36:44 am ---I know essentially nothing about practical use of opto-coupled triacs. I'll have to educate myself. Thanks for the suggestion. --- End quote --- Those are better known as SSRs. --- End quote --- 'SSR' usually refers to an assembly that includes an opto-isolated triac triggering a power triac, along with a handful of other components (input resistor, noise filtering, snubber). |
| ffrige:
@calzap: just curious, did you end up putting those TVS diodes parallel to the load or parallel to the switch? I wonder if the second option is better, because it keeps the voltage across the switch lower. Thanks! |
| wraper:
--- Quote from: jonpaul on February 05, 2020, 07:01:45 pm ---Use ordinary diode, 1N4004 for small relays, not a transient absorbing Zener Jon --- End quote --- Using regular diode has a huge downside. Relay turns off much slower, thus you will get way more contact arcing/ wear. https://www.te.com/commerce/DocumentDelivery/DDEController?Action=srchrtrv&DocNm=13C3311_AppNote&DocType=CS&DocLang=EN |
| Navigation |
| Message Index |
| Next page |
| Previous page |