Microchip MPLAB PM3 Mini-Din Power Cable Pin Out Anyone?

[KG7AMV]

Need the Power Cable PinOut for the MPLAB PM3  Searched and Searched only could find that it's 3.3V 5A and 5V .75A 5 pin min din MD-50... I Figured someone would have posted this info by now... I do not want to have to take it apart to trace it out figured i would ask before i start taking things apart.


Factory HiTRON PSU HES30-D033E-7

I Checked Externally On The Unit
Pins 4-5 Are Ground
Pins 1-2 are Connected Together 3.3V 
Pin 3 +5V

Hate to assume Pin 3 is +5 and pins 1 & 2 are 3.3 due to the amperage and have it opposite and kill the unit.


Assumptions were right pinout confirmed.

Project complete!!!

Thanks In Advance.. 

[admiralmaggie]

I'm trying to buy/build a power supply for my unit. Did you ever figure out the pin-out?

[admiralmaggie]

I think I found it. See attached...

[KG7AMV]

Sorry For No Update

I Used a Computer Power Supply and Got it Powered On.. Few Months back..

Just Got a Factory PSU Brick On Ebay.. Should Be Here This Weekend.

Ebay Link.. https://www.ebay.com/itm/142852941533



 

[admiralmaggie]

Thanks! I found the connector for anyone else who is looking for one:

https://www.digikey.com/product-detail/en/cui-inc/MD-50/CP-2050-ND/96914

[KG7AMV]

Got the Power Brick in the thing is massive in size..

MFG By
Acro Power
AXS30D-35/D7(M)



Was New With Microchip Packing's Slip..



Now to Play With ICSP