| Electronics > Projects, Designs, and Technical Stuff |
| I made a PCB etching maching! I would love to hear your thoughts |
| (1/2) > >> |
| tuvtuv:
here is a link to our blog: http://fenneclabs.net/index.php/2019/06/29/the-complete-pcb-etching-station/ |
| capt bullshot:
Nice job. I wouldn't build such a thing for my own use, I don't like to mess around with "wet" stuff and always be worried about leaks and such. |
| Benta:
A better solution is a vertical bath with bubble tubes at the bottom, where the PCBs hang vertically into the bath from the top. |
| MosherIV:
Actually spray etching is by far the better method https://hackaday.com/2012/02/11/create-pcbs-in-just-minutes-with-this-awesome-spray-etching-machine/ Or https://www.instructables.com/id/The-Etchinator-low-cost-spray-etcher/ |
| excitedbox:
I am working on a PCB printer that will print multilayer and dual sided pcbs on unclad FR4 / anything you can get the ink to stick to. Just today I received a big shipment of chemicals for producing the nano particles for the conductive inks and in the coming week or two I should have most of the other things I need. |
| Navigation |
| Message Index |
| Next page |