I'm working on a project with an Alpine x108u head unit. I could go on about that for an hour, but in short I need to extend (or get a longer) Flex cable; and I need to get some sort of break out for a different flex.
The white Flex Labeled "Sumiromo - G 20861" Goes to the front buttons, and I need to have that break out so I can solder my own buttons (that's a massively simple explanation for what I need to do.)
The Brown/Dark Flex goes to the screen, and I need a longer version of that (~8" or so)
Problem is, I have no clue where to get any of the information from either of these. The Dark flex has no markings, and I'm not knowledgeable enough in the types of flex cables to know what type of board side connector to use on the white cable.
Can anyone here help me figure this out?
![Confused :-//](https://www.eevblog.com/forum/Smileys/default/confused0024.gif.pagespeed.ce.5xOqKkq0Co.gif)