Author Topic: interface between the stm32f103rbt and cdb4344  (Read 787 times)

0 Members and 1 Guest are viewing this topic.

Offline elecdesigne

  • Newbie
  • Posts: 2
  • Country: eg
interface between the stm32f103rbt and cdb4344
« on: November 11, 2017, 03:11:36 pm »
hi
how is the interface between the stm32f103rbt and cdb4344 ?

I dont know how to canect pin togethers.
mcu does not have i2s
 

Offline elecdesigne

  • Newbie
  • Posts: 2
  • Country: eg
Re: interface between the stm32f103rbt and cdb4344
« Reply #1 on: November 15, 2017, 06:20:46 am »
Hi

How  to connect cdb4344 to spi ?
 

Offline Jeroen3

  • Super Contributor
  • ***
  • Posts: 3399
  • Country: nl
  • Embedded Engineer
    • jeroen3.nl
Re: interface between the stm32f103rbt and cdb4344
« Reply #2 on: November 15, 2017, 06:52:52 am »
You can't connect that DAC to an STM32F103 since it does not have I2S. Get a chip with I2S.
However, you could emulate single channel I2S using SPI and bit banging. With ST a SPI frame is limited to 16 bit.
Success not guaranteed.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf