Electronics > Projects, Designs, and Technical Stuff
JBC soldering iron tip cleaner
(1/1)
gaminn:
Hi,
I purchased this tip cleaner: https://www.jbctools.com/clmu-pa-universal-tip-cleaner-non-metal-brushes-product-1476.html

It cleans soldering iron tips very well but there are other problems with it:

1) It chaotically turns on/off when there is stationary object in the far field of view of the device (please see my video here: http://mysharegadget.com/554671997)

2) My tip cleaner is quite noisy. You can watch e.g. this video and see that his tip cleaner is completely noise-less (the only difference is he has metal brushes, I have plastic brushes).

3) The tip cleaner consumes 3 W in standby mode and I can see its proximity sensors are taking measurements in standby mode. Please see a picture attached. That's a minor problem but I just don't want to see that in a device that costs quite a lot of money...

Is there any other owner of CLMU tip cleaner and can confirm or disprove his unit has the same issues?
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod