Electronics > Projects, Designs, and Technical Stuff

Jellybean dual output DC DC converters?

(1/4) > >>

PartialDischarge:
So, for a battery operated system (3 to 9V) what are the most used DC-DC converters that give + - supplies (+-10..+-15V, with less than 100mA) and low noise???

I know that there are lots, last week I opened a fluke equipment and it had a MAX1675 for positive and a ICL7660 for negative....but I never know if I'm missing something that 'everyone' is using

spec:
Hi MT,

Not sure what the chip is, but this is quite a common module to give +&- supplies: https://www.google.co.uk/search?q=DC+to+plus+and+minus+supplies&tbm=isch&tbo=u&source=univ&sa=X&ved=2ahUKEwiYp6aS4_feAhUIa8AKHfQmDQAQsAR6BAgEEAE&biw=1333&bih=602#imgdii=mnz4uwgs7CiHwM:&imgrc=Zfs9VCGQI7xbgM:

technix:
I have some personal favorites but I am not sure if my favoritism is universal:
* Liberal use of TPS562200 family of 2A adjustable single-output DC-DC buck converter,
* Liberal use of LP2985-family of 50mA/150mA/300mA single output LDO regulator,

If your battery doesn't go over 5V, you can also use:
* Liberal use of LM3671 family of 600mA fixed and adjustable single output DC-DC buck converter,
* MP2212 adjustable dual output DC-DC buck converter,

Or if you use a Li-po, have a MCU or other type of CPU, and need a few different power rails:
* X-Power AXP209 microprocessor PMIC

PartialDischarge:

--- Quote from: spec on November 28, 2018, 07:09:18 pm ---Hi MT,

Not sure what the chip is, but this is quite a common module to give +&- supplies: https://www.google.co.uk/search?q=DC+to+plus+and+minus+supplies&tbm=isch&tbo=u&source=univ&sa=X&ved=2ahUKEwiYp6aS4_feAhUIa8AKHfQmDQAQsAR6BAgEEAE&biw=1333&bih=602#imgdii=mnz4uwgs7CiHwM:&imgrc=Zfs9VCGQI7xbgM:

--- End quote ---

Interesting, that seems like a boost converter for the +, and a charge pump for the -. Probably a chip sold in lcsc. That solution lowers emi, since only one branch is switching but regulation in the negative branch is bad.

PartialDischarge:
Its probably a AP3012, pinout matches the picture traces, and there seem to be some chinese knockoffs

Navigation

[0] Message Index

[#] Next page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod