| Electronics > Projects, Designs, and Technical Stuff |
| JLCPCB opinions and more |
| << < (6/7) > >> |
| battlecoder:
--- Quote from: OwO on January 12, 2019, 01:55:04 pm ---OwO UwU OwO --- End quote --- Well, someone clearly got the gist of my design. |
| TrickyNekro:
So I do have an update, I asked them for photos of what they have done and came through! I got to say though, for the price of their product they are quite helpful, yes they are probably hoping on bigger orders and such but from their customer support I am quite happy. Though you have to keep in mind that there is a language barrier, it´s quite subtle, but it leaves you wandering sometimes a little bit, if they understood right or not. But even with that, they reply fast to e-mails, so you could always ask for further clarification, I guess... I will include the photo that they send me, and when I get them I will do some macros and comparisons / overlay with the eagle file to inspect tolerances. Cheers! |
| TrickyNekro:
I will reply as I have promised with the comparison. I have a compact "dslr-y" camera so, I couldn´t get much better with the perspective error. So dimensions are not near accurate but the comparison is made for showing how the details came out. Mind you these are 2 boards out of 100. But from what I saw only the SOT-723-3 devices were just a little bit chopped at the corners. So for the price, I am really happy, but I have not gotten near their minimum specifications. For example min width and distance between traces was 6mil... Mine minimum were at 10mil. Hope it all help! Cheers |
| bson:
Am I seeing SMD pads covered with solder mask? ??? |
| TrickyNekro:
--- Quote from: bson on January 28, 2019, 05:18:38 am ---Am I seeing SMD pads covered with solder mask? ??? --- End quote --- Hmmm? No? Just the top and bottom copper and silk screen overlaid to a photo of the actual boards. And cause I have a perspective error with the camera, what you can only make out is how well, or not, the etching went. Edit: Ha! Of course I have not thought about it, problem with camera is easy to solve! Just use a scanner! That might take a day or two... |
| Navigation |
| Message Index |
| Next page |
| Previous page |