Author Topic: L298 Mosfet alternative  (Read 1642 times)

0 Members and 1 Guest are viewing this topic.

Offline ricko_ukTopic starter

  • Super Contributor
  • ***
  • Posts: 1158
  • Country: gb
L298 Mosfet alternative
« on: June 12, 2020, 07:36:54 pm »
Hi,
There are plenty MOSFET H-Bridge motor drivers but cannot find an equivalent/replacement for the classic L298 ( https://www.sparkfun.com/datasheets/Robotics/L298_H_Bridge.pdf ).

I need it to:
1) be able to control every every half bridge independently so for a full bridge I can have all 4 combinations (high or low for each side)
2) ideally up to 60V but can compromise to 35V
3) 1.5A minimum but preferably 2A

Any suggestions?

Thank you :)
 

Offline fourtytwo42

  • Super Contributor
  • ***
  • Posts: 1218
  • Country: gb
  • Interested in all things green/ECO NOT political
Re: L298 Mosfet alternative
« Reply #1 on: June 12, 2020, 07:47:15 pm »
Took me 5 seconds to turn up the L6203, anything wrong with that if you found it already ?
 

Offline wraper

  • Supporter
  • ****
  • Posts: 17952
  • Country: lv
Re: L298 Mosfet alternative
« Reply #2 on: June 12, 2020, 07:53:39 pm »
 
The following users thanked this post: thm_w

Offline picburner

  • Frequent Contributor
  • **
  • Posts: 559
  • Country: it
Re: L298 Mosfet alternative
« Reply #3 on: June 12, 2020, 08:07:01 pm »
Or LMD18200 3A 55V H-Bridge, or LMD18245 with integrate dac.
 

Offline ricko_ukTopic starter

  • Super Contributor
  • ***
  • Posts: 1158
  • Country: gb
Re: L298 Mosfet alternative
« Reply #4 on: June 12, 2020, 08:28:23 pm »
Thank you all :)

Forgot to specify it needs to be SMD. But the DRV8876 works very well. Thank you all! :)
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf