Author Topic: what's the TrueArb technology?  (Read 2110 times)

0 Members and 1 Guest are viewing this topic.

Offline xzswq21Topic starter

  • Frequent Contributor
  • **
  • Posts: 300
  • Country: 00
what's the TrueArb technology?
« on: November 08, 2017, 07:51:32 pm »
Hello
what's the difference between the DDS and TrueArb?
I couldn't find anything about it!
would you please refer me to some papers or references?
i want to work it in details.

Best Regards
❤ ❤
 

Offline jpb

  • Super Contributor
  • ***
  • Posts: 1771
  • Country: gb
Re: what's the TrueArb technology?
« Reply #1 on: November 08, 2017, 08:26:15 pm »
Keysight have several papers on it. (I presume that you mean TruForm - or perhaps TruArb is a rival technology).

Basically they interpolate/resample in real time to give very low jitter compared to standard DDS which has a fixed sample rate.

This is a good (if old) paper on the general subject:
https://m.eet.com/media/1128699/12978-choosing_a_waveform_generator_the_devil_is_in_the_details.pdf
an overview by Keysight:
http://literature.cdn.keysight.com/litweb/pdf/5991-0852EN.pdf?id=2224576
 
The following users thanked this post: xzswq21

Online tautech

  • Super Contributor
  • ***
  • Posts: 31915
  • Country: nz
  • Taupaki Technologies Ltd. Siglent Distributor NZ.
    • Taupaki Technologies Ltd.
Re: what's the TrueArb technology?
« Reply #2 on: November 08, 2017, 08:34:21 pm »
TruArb is Siglent's architecture and it delivers better signal fidelity than DDS.
You can read a little more about it here:
http://www.siglentamerica.com/prodcut-detailxx.aspx?id=1364&tid=16&T=2
Avid Rabid Hobbyist
 
The following users thanked this post: xzswq21


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf