Electronics > Projects, Designs, and Technical Stuff
Lets see ... datasheet errors ... (or likely ones ... )
(1/1)
3roomlab:
I want to kick off this with infineon mosfets

numbers are taken from SOA chart 1ms @ 20V

AUIRF1324S-7P SOA =42A (D2PAK 7pin)
DMN6068 SOA =7A (DPAK)
AUIRFR8405 SOA = 30A (DPAK)
AUIRFSA8409-7P SOA = 4.5A (D2PAK 7pin)
AUIRFS8407 SOA = 40A (D2PAK)

I am thinking, the 8405 and 8409 specs are wrong and should be

AUIRFR8405 SOA = 3A (DPAK)
AUIRFSA8409-7P SOA = 45A (D2PAK 7pin)

any thoughts?
and feel free to share any other errors/ambiguities
741:
Just grabbed the DS {AUIRFR/U8405 12 2017-10-04}. The corner of the 1mS curve,  Fig 8, at 20V looks like 30A.

That said, they own up to a mistake on that figure in an older copy of the DS
"10/17/2014 Corrected label on SOA curve Fig 8  on page 4."
T3sl4co1l:
Sounds plausible at Tc=25C versus Ta=25C. Does it say?

Tim
3roomlab:

--- Quote from: T3sl4co1l on June 12, 2019, 10:22:45 pm ---Sounds plausible at Tc=25C versus Ta=25C. Does it say?

Tim

--- End quote ---

the AUIRFR8405 chart says Tc 25C
is there a fundamental thing I am missing?
T3sl4co1l:
You can't heatsink a DPAK so that Tc=25C under load, but they rate them that way regardless.  Or they often do.

Whereas Ta=25C it's doing, a watt or so, and definitely not as much DC current.  The difference could easily be 3 vs. 30A.  Also matters what the layout is, if it's minimum footprint or, say, metal or ceramic substrate!

Tim
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod