Author Topic: Does anyone know the part number for this inline wire connector?  (Read 567 times)

0 Members and 1 Guest are viewing this topic.

Offline Puffie40Topic starter

  • Regular Contributor
  • *
  • Posts: 56
  • Country: ca
  • Irregular Logic
See the attached image - It connects to a JST PH connector and has male pins, but does not appear in the JST PH datasheet.  Despite this, it appears consistently in Asian electronics.  Any thoughts?
 

Offline HwAoRrDk

  • Super Contributor
  • ***
  • Posts: 1562
  • Country: gb
Re: Does anyone know the part number for this inline wire connector?
« Reply #1 on: May 10, 2024, 08:39:24 am »
It's probably a variation that JST themselves don't make, but Chinese clone manufacturers have come up with.

From a brief search, these seem to be a match:

https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_DLL-PH-2R_C20598779.html
https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_HCTL-HC-PH-2EY-05_C20417768.html

Actually, perhaps JST PNI series is the wire-to-wire that mates with PH? Looks fairly similar.

https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_JST-PNIRR-02VF_C594849.html
 
The following users thanked this post: Puffie40

Offline mikeselectricstuff

  • Super Contributor
  • ***
  • Posts: 13987
  • Country: gb
    • Mike's Electric Stuff
Re: Does anyone know the part number for this inline wire connector?
« Reply #2 on: May 10, 2024, 10:58:48 am »

Actually, perhaps JST PNI series is the wire-to-wire that mates with PH? Looks fairly similar.

https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_JST-PNIRR-02VF_C594849.html
the latch detail looks different
Youtube channel:Taking wierd stuff apart. Very apart.
Mike's Electric Stuff: High voltage, vintage electronics etc.
Day Job: Mostly LEDs
 

Offline HwAoRrDk

  • Super Contributor
  • ***
  • Posts: 1562
  • Country: gb
Re: Does anyone know the part number for this inline wire connector?
« Reply #3 on: May 10, 2024, 11:14:46 am »
the latch detail looks different

Ah, you're right. Was difficult to tell from the pictures, I was looking on mobile.
 

Offline Puffie40Topic starter

  • Regular Contributor
  • *
  • Posts: 56
  • Country: ca
  • Irregular Logic
Re: Does anyone know the part number for this inline wire connector?
« Reply #4 on: May 10, 2024, 05:50:14 pm »
It's probably a variation that JST themselves don't make, but Chinese clone manufacturers have come up with.

From a brief search, these seem to be a match:

https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_DLL-PH-2R_C20598779.html
https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_HCTL-HC-PH-2EY-05_C20417768.html

Actually, perhaps JST PNI series is the wire-to-wire that mates with PH? Looks fairly similar.

https://www.lcsc.com/mobile/product-detail/Housings-Wire-To-Board-Wire-To-Wire_JST-PNIRR-02VF_C594849.html
Thanks for the LCSC links!  I wanted to put this connector into a RapidHarness drawing, but I didn't want to use something that I could not provide a source or datasheet for.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf