Electronics > Projects, Designs, and Technical Stuff
Looking for 4mm PCB mount banana plugs
<< < (3/4) > >>
MiDi:

--- Quote from: Mr. Scram on January 23, 2019, 09:49:52 pm ---Ah, I hadn't noticed they are brass before. Still, decent option.

--- End quote ---

They are BeCu, response from Stäubli and they can be used for low thermal emf purpose.
Take a look at https://www.eevblog.com/forum/metrology/a-story-of-one-datron-wavetek-4708-(doktor-pytas-lab)/msg1952110/#msg1952110
nsrmagazin:
I updated the links in post #2 with something else I found, as the previous link in the site was removed.
Mr. Scram:

--- Quote from: MiDi on January 24, 2019, 06:20:14 am ---They are BeCu, response from Stäubli and they are used for low thermal emf purpose.
Take a look at https://www.eevblog.com/forum/metrology/a-story-of-one-datron-wavetek-4708-(doktor-pytas-lab)/msg1952110/#msg1952110

--- End quote ---
You asked Stäubli what the material is? Them having been tested to satisfaction is certainly encouraging.
MiDi:
Yes, I asked Stäubli and user ap confirmed that they are ok thermal emf wise.
Mr. Scram:

--- Quote from: MiDi on January 24, 2019, 06:45:28 am ---Yes, I asked Stäubli and user ap confirmed that they are ok thermal emf wise.

--- End quote ---
Awesome. Looks like I have an answer. Thank you!
Navigation
Message Index
Next page
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod