| Electronics > Projects, Designs, and Technical Stuff |
| Looking for High Current capable connector ( ~100 Amps) for PCB |
| (1/3) > >> |
| gmanda:
Hi, So I have a battery protection circuit on a PCB (under/over voltage and overcurrent). I'm looking for the name of the connectors similar to the ones shown in the picture. I just cant find the name. Can anyone help me pls? |
| jbb:
I’m not sure what the part is called, but the picture seems to be a evaluation board. If you have a look around, maybe the evaluation board maker has a Bill Or Materials available? That would contain the connector details. |
| gmanda:
Sorry i forgot to mention - yes it is an evaluation board but it has no BOM :( |
| ahbushnell:
That is a wire lug. Here are some examples on McMaster Carr. https://www.mcmaster.com/lug Here is an example that looks similar but is probably larger than yours. https://www.mcmaster.com/6920k35 What gauge wire do you plan on using? |
| gmanda:
THANKS A LOT my man!!!!! Yeah I finally could find several parts. Digikey being my preferred vendor, I found a whole section of these (https://www.digikey.com/product-detail/en/panduit-corp/LAMA2-14-QY/298-10109-ND/317639) Yeah i think I will go with something like 2-4 AWG. |
| Navigation |
| Message Index |
| Next page |