| Electronics > Projects, Designs, and Technical Stuff |
| Making an induction motor go crazy fast. |
| << < (10/10) |
| amyk:
That looks like the type of motor used in washing machines, which see over 10kRPM in normal service (belt-drive drum with at least 10:1 reduction, 1000RPM+ spin cycle, you do the maths...) |
| Yansi:
Didn't the OP author say explicitly, it is an induction motor from a door slammer? What would you need 10k RPM for there? It is more than likely a standard 50/60Hz motor, likely even a multiple pole-pair type, to get torque and lower speed. //EDIT: 6pole motor (sub-1000 RPM), as per the OP. |
| Circlotron:
Yep, a sliding door motor. See page 3 --> https://www.kanonkapi.com/wp-content/uploads/2018/08/MANUSA-BRAVO-2.pdf |
| amyk:
Yes, I'm just saying that such speeds are not unusual for induction motors of that size and construction. |
| Navigation |
| Message Index |
| Previous page |