TrueTime XL-AK 600-00 : Options

[comsec22]

I found the right pin to inject an external 10 Mhz standard (pin F + Gnd) moving JP6 by 2-3 to 2-1..
when i try to give serial command F07 : ERROR 05 NO SUCH FUNCTION.

External Oscillator Enable, is one of the several options, is it any possible way to enable ?
Perhaps is the firmware in eeprom..

F18 : TRUETIME XL     ACE3 sys ver 029 GPS-XL V1.046   182-6064v007

Any supports is welcome.

[barshatriplee]

It's possible that the F07 command is not available on your Tektronix TDS 524a oscilloscope, which is why you are getting the "ERROR 05 NO SUCH FUNCTION" message. I think you should contact Tektronix technical support: https://www.tek.com/en/support/contact-technical-support

[comsec22]

barshatriplee..

The topic is related to a TrueTime GPS not to a Tektroniks scope..