| Electronics > Projects, Designs, and Technical Stuff |
| Mostly manual PCB cad recommendation please |
| (1/2) > >> |
| tkamiya:
Are there any PCB cad software that lets me manually place rounds and vias and hand-route traces? I only need simple 2 layer boards. I do not need any auto-routing capability or capturing circuit diagrams. My ideal candidate would be 2 layer board, 10cm x 10cm or larger, grid line on display, manual placement of rounds and specify size of holes, then manually route traces, and create ground pours. The end result should be a gerber file that I can send to manufacturing. PLEASE - no argument as to why and such-and-such method is better. I have my reasons which I am not willing to share in public forums. (I'm not trying to be rude, please do understand) |
| ve7xen:
I think most ECAD software should be able to handle this. You might need to turn off some automatic ERC checks / push and shove and such but it shouldn't be that hard. It's not like I've tried, of course, but I believe this should be doable in KiCad if you peruse the options and disable the stuff that prevents you from joining dissimilar nets. |
| thinkfat:
--- Quote from: ve7xen on February 06, 2020, 10:56:43 pm ---I think most ECAD software should be able to handle this. You might need to turn off some automatic ERC checks / push and shove and such but it shouldn't be that hard. It's not like I've tried, of course, but I believe this should be doable in KiCad if you peruse the options and disable the stuff that prevents you from joining dissimilar nets. --- End quote --- I'm not sure if KiCad will pour copper fills that are not connected to any net. |
| ejeffrey:
In my experience most eda cad tools can do this but it is more trouble than it is worth. Using AutoCAD or some other generic 2D cad tool might be easier. I gave up and usually just create a dummy schematic. |
| markce:
I use the Sprint-Layout tool from Abacom for this. It is cheap and very easy to use. Good for small projects and hobby use. You can download a trial copy from: https://www.electronic-software-shop.com/ |
| Navigation |
| Message Index |
| Next page |