Author Topic: Mounting small PCB in vertical DIN rail enclosure  (Read 1731 times)

0 Members and 1 Guest are viewing this topic.

Offline SparKingTopic starter

  • Newbie
  • Posts: 1
  • Country: us
Mounting small PCB in vertical DIN rail enclosure
« on: January 12, 2019, 07:17:12 pm »
Hello,

I'd like to mount a small custom PCB in a DIN rail module; ideally the really narrow vertical jobbies like terminal blocks.  For the life of me, I can't seem to find an enclosure like it that is empty, for the intention of mounting custom PCB's/components inside.  Anyone have a source for something like this, cheap (< $5US)?

Regards,

Mike
 

Offline Benta

  • Super Contributor
  • ***
  • Posts: 6420
  • Country: de
Re: Mounting small PCB in vertical DIN rail enclosure
« Reply #1 on: January 12, 2019, 07:33:10 pm »
Search for "Phoenix Contact DIN rail housings"

No affiliation.
 
The following users thanked this post: SparKing

Offline Jester

  • Frequent Contributor
  • **
  • Posts: 898
  • Country: ca
Re: Mounting small PCB in vertical DIN rail enclosure
« Reply #2 on: January 13, 2019, 12:11:29 am »
Bud industries - Digi-key
 
The following users thanked this post: SparKing

Offline scuzzyTerminator

  • Regular Contributor
  • *
  • Posts: 64
  • Country: us
Re: Mounting small PCB in vertical DIN rail enclosure
« Reply #3 on: January 13, 2019, 07:26:13 am »
I see these a lot on Ali. They are for mounting PCBs. I think they should work with a small enclosure
 
The following users thanked this post: SparKing

Offline kony

  • Regular Contributor
  • *
  • Posts: 242
  • Country: cz
 
The following users thanked this post: SparKing

Offline Larry80

  • Contributor
  • Posts: 21
  • Country: fi
Re: Mounting small PCB in vertical DIN rail enclosure
« Reply #5 on: January 13, 2019, 03:26:16 pm »
Cheap and din mounting sounds like a bad idea, always check for the flammability ratings of enclosures. If no reputable answers are given, threat them as flammable paper, good for use under personal supervision.
 
The following users thanked this post: SparKing

Offline Yansi

  • Super Contributor
  • ***
  • Posts: 3930
  • Country: 00
  • STM32, STM8, AVR, 8051
Re: Mounting small PCB in vertical DIN rail enclosure
« Reply #6 on: January 13, 2019, 03:28:27 pm »
There is a metric shit ton of dirt cheap DIN rail housings at  TME.eu.
 
The following users thanked this post: SparKing


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf