Electronics > Projects, Designs, and Technical Stuff
MPXV5010GC7U pinout confusion
(1/1)
Salatkurke:
Hi everyone,

I want to use the MPXV5010GC7U Pressure Sensor in a project but can't find the correct pinout in the datasheet.

Link to Mouser datasheet: https://eu.mouser.com/datasheet/2/302/MPX5010-1127094.pdf

The package in question is referred to as "CASE 482C-03" in the datasheet, but on page 9 there is no pinout to be found. Instead there are two different 8-pin pinouts described on page 14 titled "Style 1" and "Style 2". No idea what this means. If anyone less incompetent could take a look at it that would be greatly appreciated.

Cheers
stmdude:
Looking at https://www.nxp.com/docs/en/data-sheet/MPX5010.pdf instead. Your link didn't want to load for me.

The pinout is (in a quite non-obvious way) on page 4.

For 482C-03 (which is a SOP package according to page 2), the pinout is:
2 - Vs
3 - GND
4 - Vout
1,5,6,7,8 are NC
Salatkurke:
Wow, totally missed that. Guess I stopped reading at "internal circuitry" ^^'
Thanks for your help!
Navigation
Message Index
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod