
igniter profile. 9.32A @ 12V for 200 microseconds to fire.
manually tested ~100 igniters, all fire was 0.55A @ 12v. igniters are ~1.17ohm.
extremely consistent and reliable, i have been using them for many shows for many years now. igniter wires are 27awg.
uC uses completely separate power source from the igniter power source.
cues are only toggled for a few milliseconds, as thats all that is needed to fire them. there is a master safe/arm switch, darlingtons choose the cue and an ssr controls igniter power. only one channel is fired at a time.