EEVblog Electronics Community Forum
Electronics => Projects, Designs, and Technical Stuff => Topic started by: Hugoneus on August 13, 2023, 03:36:08 am
-
You can watch the video here: [49 Minutes]
youtu.be/1XJvA6rwlB0 (https://youtu.be/1XJvA6rwlB0)
In this episode Shahriar takes a deep dive into near-THz sub-harmonic mixers. To demonstrate the concepts, measurements and teardowns a set of Tektronix Sub-Harmonic mixers have been acquired (WM 490-F & WM 490-W) which operate from 90-140GHz & 75-110GHz
respectively. This video is organized as follows:
00:00 - Introductions
00:50 - Acquired near-THz sub-harmonic mixers & diplexers
01:26 - Theoretical background, non-linear devices, harmonic generation
06:05 - Spectrum analyzers utilizing sub-harmonic mixers, signal ID
08:27 - Tektronix sub-harmonic mixer design, schematic & principle of operation
15:11 - Mixer diode characterization using Keithley SMUs & I/V tracer application
19:59 - Mixer teardown, analysis and microscope view of THz diode
28:07 - Diplexer architecture & characterization using a 4-port Siglent network analyzer
33:24 - Complete near-THz down-conversion setup using a x6 mm-wave multiplier source and Tektronix MSO68-B oscilloscope, conversion loss, harmonic number verification, signal ID process
45:35 - Using a ~100GHz carrier to determine the RPM of a optical chopper
48:15 - Concluding remarks
www.TheSignalPath.com/Donate (http://www.TheSignalPath.com/Donate)
www.Patreon.com/TheSignalPath (http://www.Patreon.com/TheSignalPath)
www.YouTube.com/TheSignalPath (http://www.YouTube.com/TheSignalPath)