Author Topic: Need a IoT wifi module supporting EVM board  (Read 565 times)

0 Members and 1 Guest are viewing this topic.

Offline Md Mubdiul HasanTopic starter

  • Regular Contributor
  • *
  • Posts: 202
  • Country: kr
  • Lets learn more to be more inspired in Electronics
Need a IoT wifi module supporting EVM board
« on: April 23, 2019, 02:28:56 am »
Hi There,

Does it possible to virtual simulation of a IoT wifi module?
Suggest me kindly.

I am working with a WIFI module from a different company.
It has JTAG interface with API, SPI protocol with main MCU and UART as well.
Take a look the image below.

Kindly find a suitable EVM to support it in case of IoT.
I will provide all information relating to this project.

Following facilities are required...

1. USB to serial driver.
2. Serial terminal utility.
3. Wifi Mode setup
4. Setup soft mode
5. Command line interface
6. Consol command
Hasan
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf