« previous next »
Pages: [1]   Go Down

Author Topic: Need an alternative to FFC/FPC connector  (Read 1736 times)

0 Members and 1 Guest are viewing this topic.

Offline polysomeTopic starter

  • Newbie
  • Posts: 6
Need an alternative to FFC/FPC connector
« on: December 29, 2014, 07:38:05 am »
Hello I have a design for a FPGA PCB with a 60 pin GPIO breakout via a FFC/FPC connector. Its a small board and the connector is too big. Its on the underside of a miniPCIe board... what are my options ? What is a good choice for a more dense connector that is resistant to crosstalk, durable and cheap... has a near 0 height profile... and has a flex cable output ?

Logged
 

Offline Psi

  • Super Contributor
  • ***
  • Posts: 9967
  • Country: nz
Re: Need an alternative to FFC/FPC connector
« Reply #1 on: December 29, 2014, 07:42:18 am »
I take it soldering the FFC/FPC directly onto the PCB is out of the question?
Logged
Greek letter 'Psi' (not Pounds per Square Inch)
 

Offline Korken

  • Regular Contributor
  • *
  • Posts: 84
  • Country: se
Re: Need an alternative to FFC/FPC connector
« Reply #2 on: December 29, 2014, 07:52:08 am »
Maybe use two connectors? One on each side of the PCB, then you can half the connector size.
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee