Electronics > Projects, Designs, and Technical Stuff
Need assistance with LM1875 amp cct
<< < (3/3)
Audioguru:
The National Semi and Texas instruments datasheets of the LM1875 clearly shows a minimum supply of 16V on the first page and a graph shows almost no output power at such a low voltage.
Of course the + input must be biased at half the supply voltage and the - input must have AC and DC negative feedback.

A 1uF input capacitor feeding the 22k input resistor cuts frequencies at and below 7.3Hz. It does not need 10uF.
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod