Electronics > Projects, Designs, and Technical Stuff

Need assistance with LM1875 amp cct

<< < (3/3)

Audioguru:
The National Semi and Texas instruments datasheets of the LM1875 clearly shows a minimum supply of 16V on the first page and a graph shows almost no output power at such a low voltage.
Of course the + input must be biased at half the supply voltage and the - input must have AC and DC negative feedback.

A 1uF input capacitor feeding the 22k input resistor cuts frequencies at and below 7.3Hz. It does not need 10uF.

Navigation

[0] Message Index

[*] Previous page

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod