Hi,
I've recently received some PCBs from manufacturing and they're all faulty, they have a solid short between the ground plane on the first inner layer and the 3.3V power plane on the second inner layer. The PCBs were made with KiCad and they pass DRC. I've attached the Gerber files and also the KiCad PCB file here, I'd be glad if you could help me find the problem with my design. The minimum track/clearance should be 6/6 mil. The PCBs were made by Aisler, I have used them before and I was always happy with the results.
The KiCad PCB file has been renamed as .txt due to restrictions with file types, you can just rename it back to .kicad_pcb.
Thanks,
Matthias