Author Topic: NEED HELP . Transformer Black magic !!  (Read 2298 times)

0 Members and 1 Guest are viewing this topic.

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
NEED HELP . Transformer Black magic !!
« on: July 09, 2019, 04:49:28 pm »
Hi Guys,

I dont have alot of experience with transformers (lol).  only about 25 years. - but i dont usually try too hack them with bizarre electronics methodology ...   naturally im trying too debunk some facinating work done on an Australia forum  HYIQ.org .  - they are trying too create excess energy from transformers using various means.,  and i fancied a challenge.

Anyway i have been trying too figure out why my transformers output is increasing whilst loading a second secondary on the same transformer....    - i am sure this is due too leaky inductance or loss's in some way, - but i just dont understand, why i can short the output , and get more power !!.    any ideas fellas ?

 

Offline bsfeechannel

  • Super Contributor
  • ***
  • Posts: 1668
  • Country: 00
Re: NEED HELP . Transformer Black magic !!
« Reply #1 on: July 09, 2019, 05:05:53 pm »
Schematic or it didn't happen.
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 20357
  • Country: gb
  • 0999
Re: NEED HELP . Transformer Black magic !!
« Reply #2 on: July 09, 2019, 05:11:56 pm »
Yes, we need a schematic to see what's going on. I watched the video and it's not clear exactly how it's wired up.
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #3 on: July 09, 2019, 05:13:22 pm »
 

Offline MagicSmoker

  • Super Contributor
  • ***
  • Posts: 1408
  • Country: us
Re: NEED HELP . Transformer Black magic !!
« Reply #4 on: July 09, 2019, 05:18:10 pm »
Hi Buddy, - this is my circuit concept, - sorry about the crapness. - its not a precise schematic ;-D



High OP to URL link content ratio detected.
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #5 on: July 09, 2019, 05:18:55 pm »
i will answer all of your questions, - with many thanks,

however last time i posted free energy stuff on eevlog my account was vanished...  but this time im trying too debunk it !!

anyhoo, it would appear that this imperfect transformer,  experiences an increase in available output power from SEC1.  - whilst in a condition of *very specific loading*  too the SEC2 COIL

when i consider this, my brain involuntarily shuts down. - just does not compute !!   HI DAVE !!!
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #6 on: July 09, 2019, 05:20:54 pm »
Thanks Magic Smoker, -   my gratuitous links may have been causing issues last time i posted here ;-).  but i love daves videos, - and want a followup on sagans mechano !!
 

Offline Zero999

  • Super Contributor
  • ***
  • Posts: 20357
  • Country: gb
  • 0999
Re: NEED HELP . Transformer Black magic !!
« Reply #7 on: July 10, 2019, 09:40:56 am »
Hi Buddy, - this is my circuit concept, - sorry about the crapness. - its not a precise schematic ;-D

http://aboveunity.com/content/uploads/036da5f1-33af-47bc-a2b4-aa2c00e4238d/0e1b7ddb-a8bd-42fa-b41c-aa6600cbdef4_delayed-conduction-circuit.jpg?width=690&upscale=false
That's not a proper schematic.

In order to stand any chance of answering the question, we need enough information to be able to replicate the experiment.
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #8 on: July 10, 2019, 10:54:06 am »
with respect sir, i would say its better than a *proper schematic,* - i say this because, very few will replacate this, and those who do, will already know how too make a 555 timer work. -     - please accept this as a concept drawing, designed too aid the reader in considering the principles.       furthermore, i designed this set of opamps and 555 timers, - too take their reference signal from a fixed frequency sawtooth generator - enabling me too set a start position for 3 opamps, based on the sawtooth gradient.  , and each opamp will output a square wave, into a 4component single shot circuit 2n3904,   and that uS pulse will trigger a 555 timed single shot.

so now we have 3 square waves, all of which can be moved backwards and forwards in time, in relation too eachother. with adj duty.

please accept the scope shot and video as evidence of my description. .  are there any areas of curiosity i can go into more details about ?.   i am changing the circuit all time, and the 3 small opamp drivers as seen in picture in the video next too the main boards. -  but dont feel bad if you cannot explain this, - i took up electronics in the form of a cert 2 course @ age 15, and also completed a Cert 3 at age 16. and have been doing it ever since, - but transformers are still sheathed in darkness for me. very much open too discussion.
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #9 on: July 10, 2019, 10:57:27 am »
also this is the highly energy inefficient circuit i use too pull down rise and fall times of the opamp. too well below manufacture spec.
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #10 on: July 10, 2019, 12:03:16 pm »
hey boys, this is what i am trying too debunk ;-D. ...   accept im taking an overengineered approach, - in the authors words ;-)

http://www.hyiq.org/downloads/guidelines%20to%20Bucking%20Coils.pdf
 

Offline mdszy

  • Supporter
  • ****
  • Posts: 291
  • Country: us
  • somehow has an ee degree
    • szy.io
Re: NEED HELP . Transformer Black magic !!
« Reply #11 on: July 10, 2019, 01:18:48 pm »
with respect sir, i would say its better than a *proper schematic,* - i say this because, very few will replacate this, and those who do, will already know how too make a 555 timer work. -     - please accept this as a concept drawing, designed too aid the reader in considering the principles.       furthermore, i designed this set of opamps and 555 timers, - too take their reference signal from a fixed frequency sawtooth generator - enabling me too set a start position for 3 opamps, based on the sawtooth gradient.  , and each opamp will output a square wave, into a 4component single shot circuit 2n3904,   and that uS pulse will trigger a 555 timed single shot.

No, it isn't "better" than a schematic. Just because you think people will be able to recreate something from your design description doesn't mean anyone should have to in order to understand what is going on. The point is, we need to see how your circuit is hooked up so we can analyze the circuit and figure out what's going on without having to build your setup ourselves. That's the entire purpose of a schematic.
somehow allowed to be a Pixie Wrangler in Training
eBay Store | My site | Hackaday.io Projects | my mastodon.technology profile
 

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #12 on: July 10, 2019, 04:28:56 pm »
if only you were clever enough too not abandon your children too a future of darkness.

please ban my account again for posting free energy debunking

- i still welcome any sensible question.  understand. i have no intention of spending any time making a drawing that will be outdated before its complete.  - im going back too work.
 

Offline mdszy

  • Supporter
  • ****
  • Posts: 291
  • Country: us
  • somehow has an ee degree
    • szy.io
Re: NEED HELP . Transformer Black magic !!
« Reply #13 on: July 10, 2019, 04:32:13 pm »
if only you were clever enough too not abandon your children too a future of darkness.

please ban my account again for posting free energy debunking

- i still welcome any sensible question.  understand. i have no intention of spending any time making a drawing that will be outdated before its complete.  - im going back too work.

 :palm: :bullshit:
somehow allowed to be a Pixie Wrangler in Training
eBay Store | My site | Hackaday.io Projects | my mastodon.technology profile
 

Offline CJay

  • Super Contributor
  • ***
  • Posts: 4136
  • Country: gb
Re: NEED HELP . Transformer Black magic !!
« Reply #14 on: July 10, 2019, 06:00:09 pm »
I've a feeling this new account will vanish in a puff of zero point energy soon too.

 :popcorn:
 
The following users thanked this post: Ysjoelfir, patrick1

Offline patrick1Topic starter

  • Contributor
  • Posts: 49
  • Country: au
Re: NEED HELP . Transformer Black magic !!
« Reply #15 on: July 11, 2019, 06:13:03 am »
well i slept on it,  and still here, which is great ;-)

however less impressed that nobody wants too show off and solve the problem, that i cannot.

oh well. glad i tried ;).  nothing like a good electronics humbling...   but my problem is so profound it could almost be termed obtuse.  - but i assure you it is a very genuine problem and question.   . so much so, i am now considering drawing up a full diagram for you guys, - but i just dont know how much detail too go into, since ultimately i could possibly not draw the 555timers and related components, and just list freq's and dutys instead. - but im not above believing that some ppl might actually be able too use this extra information.

as i see it however,  it is easy too understand the circuits. - but my problem would be my inability too describe  the details of the physical transformer, since really all i have is a cheap LCR meter and scopes.....

peace.

wish me luck.
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf