| Electronics > Projects, Designs, and Technical Stuff |
| Arduino mega 2650 for a small CNC |
| (1/1) |
| sourcecharge:
Arduino mega 2650 chipset It's a D6 MB with Marlin 1.1.9 firmware that I have been able to modify and understand. It can connect directly to a computer via a USB cable and I have found that "pronterface" can directly connect to it and move the steppermotors. My next step is to get mach 3 and fusion 360. The railing system should be the easiest part but still needs to be made. |
| Navigation |
| Message Index |