Electronics > Projects, Designs, and Technical Stuff

Arduino mega 2650 for a small CNC

(1/1)

sourcecharge:
Arduino mega 2650 chipset

It's a D6 MB with Marlin 1.1.9 firmware that I have been able to modify and understand.

It can connect directly to a computer via a USB cable and I have found that "pronterface" can directly connect to it and move the steppermotors.

My next step is to get mach 3 and fusion 360. 

The railing system should be the easiest part but still needs to be made.

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod