Electronics > Projects, Designs, and Technical Stuff
Need help with ground loop
<< < (5/5)
laejf:
I don't know if anyone is interested, but I managed to erase pretty much all noise by focusing on the 3.5mm cable connected to the BT-module instead of the feeding of the module. I replaced it with a short microphone-cable soldered to the module and amplifier-board this makes it a bit less modular and flexible but at least i know what to think of when/if I'm re-designing the board. Thank you for your suggestions!
Navigation
Message Index
Previous page
There was an error while thanking
Thanking...

Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod