EEVblog Electronics Community Forum

Electronics => Projects, Designs, and Technical Stuff => Topic started by: fozzyvis on July 13, 2013, 10:13:53 am

Title: Need some help identifying connector
Post by: fozzyvis on July 13, 2013, 10:13:53 am

Hi all,

I am currently working on a wireless tally control system for a client of mine.
The cameras are JVC GY-HM790E models.
While the electrical side of the control is working, I can't seem to find the correct connector.
I've gone through numerous catalogues and websites, but no luck so far.

-10 pins
-circular design, no center pins
-mating plug inside diameter about 8.1mm, OD about 9.8mm
-three positioning tabs dividing the connector in 2X 3pins and one time 4 pins
-marked on the top is "qqq DO-111" the q's are italic, not sure whether it's D0 or D1

Anyone any clues?

Regards,

dieter

Title: Re: Need some help identifying connector
Post by: amyk on July 13, 2013, 12:16:32 pm

The company seems to have been http://www.qqq.co.jp/ (http://www.qqq.co.jp/)  and is now http://www.technical-e.co.jp/ (http://www.technical-e.co.jp/)

Here is a reference to the part number to show that they once made them:
http://web.archive.org/web/20000620191706/http://www.qqq.co.jp/hp/component/qqqhomepage01b.htm (http://web.archive.org/web/20000620191706/http://www.qqq.co.jp/hp/component/qqqhomepage01b.htm)

Stumbling around their new website with an automatic translator shows that they still make them:
http://www.technical-e.co.jp/cgi-bin/business/elec_precision/detail.cgi?id=D0111N100A (http://www.technical-e.co.jp/cgi-bin/business/elec_precision/detail.cgi?id=D0111N100A)
http://www.technical-e.co.jp/cgi-bin/business/elec_precision/detail.cgi?id=D0111N200A (http://www.technical-e.co.jp/cgi-bin/business/elec_precision/detail.cgi?id=D0111N200A)
http://www.technical-e.co.jp/pdf/parts/catalog_10.pdf (http://www.technical-e.co.jp/pdf/parts/catalog_10.pdf)

(I have no idea where to buy one though.)

Title: Re: Need some help identifying connector
Post by: fozzyvis on July 13, 2013, 12:28:18 pm

@Amyk: That's a great start, thanks!
May I ask how you found these? I really tried looking and searching for a lot of different search strings and sites, but nothing came up.
Wonder how you found this...

Title: Re: Need some help identifying connector
Post by: amyk on July 14, 2013, 01:22:55 pm

Quote from: fozzyvis on July 13, 2013, 12:28:18 pm

@Amyk: That's a great start, thanks!
May I ask how you found these? I really tried looking and searching for a lot of different search strings and sites, but nothing came up.
Wonder how you found this...

* Googled "qqq connector" and found their old website, then followed it to their new one and started poking around their products.