« previous next »
Pages: [1]   Go Down

Author Topic: CVBS/YPbPr video output for an iMX6S processor  (Read 2407 times)

0 Members and 1 Guest are viewing this topic.

Offline supernudoTopic starter

  • Newbie
  • Posts: 3
CVBS/YPbPr video output for an iMX6S processor
« on: May 07, 2013, 03:54:17 pm »

Hi guys,

I'm designing a system based on iMX6S processor and it has to support a CVBS/YPbPr video interface output. The MCU has several video interfaces but all of them are digital: parallel display, HDMI1.4, MIPI and LVDS interface. For the moment, I’m thinking in use the CH7106A converter from Chrontel.

Anybody know an alternative solution?

Thanks!
Logged
 

Offline yanir

  • Regular Contributor
  • *
  • Posts: 216
  • Country: us
Re: CVBS/YPbPr video output for an iMX6S processor
« Reply #1 on: April 13, 2014, 03:21:45 am »
You will need an ISP in between your video source and the imx6.


Sent from my iPhone using Tapatalk 2
Logged
 

Offline NiHaoMike

  • Super Contributor
  • ***
  • Posts: 9609
  • Country: us
  • "Don't turn it on - Take it apart!"
    • Facebook Page
Re: CVBS/YPbPr video output for an iMX6S processor
« Reply #2 on: April 13, 2014, 03:29:19 am »
Connect some DACs to the parallel output? Depending on the video quality requirements, a few resistors might be good enough.
Logged
Cryptocurrency has taught me to love math and at the same time be baffled by it.

Cryptocurrency lesson 0: Altcoins and Bitcoin are not the same thing.
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee