Author Topic: Old Ricoh printer reusing the lcd  (Read 193 times)

0 Members and 1 Guest are viewing this topic.

Offline no_name03Topic starter

  • Newbie
  • Posts: 1
  • Country: hr
Old Ricoh printer reusing the lcd
« on: January 17, 2025, 03:50:25 pm »
Hi there, I would like to reuse the electronic components of and old Ricoh Aficio MP C2031, more specifically the screen, which is and LCD (640x200) labeled SHARP, with part number  LM089HB1T02. I was unable to find any datasheet on the device, so I have no idea how to use this device. It has a flex cable with 17 pins and 2 wire cable for power (most probably). I'd like to use also the other components (some RICOH labeled chips there, for example MB87F4192), for which I also couldn't find any datasheets. Any help would be appreciated.
 

Offline DavidAlfa

  • Super Contributor
  • ***
  • Posts: 6438
  • Country: es
Hantek DSO2x1x            Drive        FAQ          DON'T BUY HANTEK! (Aka HALF-MADE)
Stm32 Soldering FW      Forum      Github      Donate
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf