« previous next »
Pages: [1]   Go Down

Author Topic: Flexible Heating element  (Read 448 times)

0 Members and 1 Guest are viewing this topic.

Offline wilmerTopic starter

  • Contributor
  • Posts: 33
  • Country: au
Flexible Heating element
« on: April 27, 2021, 03:03:04 am »
Hi,


I need to head materials inside nozzles at 45 degrees (C). Until these points it is easy. The problem is that the space let between nozzle is 1mm. And the max height is 5mm. I had been looking around and the best option looks like a flexible POLYIMIDE (KAPTON) HEATER https://www.flexheaters.com/polyimide-kapton-heater. This looks like a kapton tape with printed conductive ink.

The total quantity of nozzle is over 80

Have you seen any other option?


Cheers


Wil

Logged
 

Offline strawberry

  • Super Contributor
  • ***
  • Posts: 1183
  • Country: lv
Re: Flexible Heating element
« Reply #1 on: April 27, 2021, 06:07:18 am »
flex PCB  with copper trace heater and could solder temperature sensor chip as well
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee