Open Source AlienTek DP100 Firmware

[seth.daniels]

Hello everyone,

It seems like the Alientek DP100 runs off of a STM32F4 clone (AT32F415). Has anyone made an open-source firmware version of this? I know there’s lots of complaints about the UI despite the hardware being impressive for the price, so I’m curious if anyone has tried REing the FW in any way. I’m deciding whether or not to purchase one to do this myself…

[coromonadalix]

some eevblog thread 

https://www.eevblog.com/forum/testgear/dp100-mini-power-supply-(0-30v-0-5a)/

theres others



google searching this: alientek dp100 software

gives some answers or some work, you may get luck there ?

https://github.com/scottbez1/webdp100
https://en.alientek.com/download.html
https://github.com/jjcarrier/vicon
https://github.com/lessu/open_dp100
https://blog.adafruit.com/2023/12/20/making-a-digital-power-supply-driver-and-gui-using-webhid/


since there was cases of burning, failures and overshoot when you power them down,  i'm not sure i would use them,  at least on non sensitive stuff for sure