Electronics > Projects, Designs, and Technical Stuff

OTA VCR question

(1/1)

Jan Audio:
Hi, i like to have a voltage controlled resistor,
i am looking in the LM13700 datasheet,
there is a single ended resistor schematic
and there is a dual ended schematic.

I dont understand what is a single ended resistor ?
And the schematic is not clear to me, is the input at the + input ?, and the Vout is behind a capacitor ?, why is that ?

I will try the dual ended resistor, will it give exact the same voltage at the output, or will is be different somehow ?
thanks

Kleinstein:
The OTA can be used as a variable gain amplifier and this can be reasonably help to simulate a resistor to ground. Simulating a fre floating resistor is way more complicated. In this case I would consider something like a Photomos device like H11F1 - though this is limited to low voltage.

Jan Audio:
Thanks, only i need 12 volt at least.

Jan Audio:
Maybe my LM13700 is broken, it takes not a milliamp power when i connect the +
the whole thing dont works.

JPortici:
the VCR thing works, check your wiring. You may also have a 13700 with damaged buffers (it's not unusual for that to happen)

Navigation

[0] Message Index

There was an error while thanking
Thanking...
Go to full version
Powered by SMFPacks Advanced Attachments Uploader Mod