« previous next »
Pages: [1]   Go Down

Author Topic: Crimped pins soldered to the board?  (Read 1654 times)

0 Members and 1 Guest are viewing this topic.

Offline fabiodlTopic starter

  • Frequent Contributor
  • **
  • Posts: 282
Crimped pins soldered to the board?
« on: January 21, 2020, 02:15:51 pm »
This "connector" has crimped pins which are directly soldered to the board.
Does someone know it? The pitch appears to be 3.96mm (it's slightly less than 4mm)

« Last Edit: January 23, 2020, 07:59:16 am by fabiodl »
Logged
 

Offline fabiodlTopic starter

  • Frequent Contributor
  • **
  • Posts: 282
Re: Crimped pins soldered to the board?
« Reply #1 on: January 23, 2020, 08:00:30 am »
If it may help, the other connectors used seem to be JST. the cable is terminated by a JST vh, and another connector on the board is a JST XH
Logged
 
Pages: [1]   Go Up
« previous next »

Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf

 


EEVblog Main Site EEVblog on Youtube EEVblog on Twitter EEVblog on Facebook EEVblog on Odysee