| Electronics > Projects, Designs, and Technical Stuff |
| Part recommendation micro voltage regulator for battery powered stuff |
| (1/1) |
| Daque:
I looking for a good inexpensive 3.3v regulator low quiescent current and maybe good for a half amp or one good for 250 ma with an enable pin. Target will be ESP32-Wroom and misc. Maybe using a 2nd one the ESP could turn on would work out better? Thoughts and comments welcome. |
| aiq25:
--- Quote from: Daque on September 20, 2019, 04:47:06 pm ---I looking for a good inexpensive 3.3v regulator low quiescent current and maybe good for a half amp or one good for 250 ma with an enable pin. Target will be ESP32-Wroom and misc. Maybe using a 2nd one the ESP could turn on would work out better? Thoughts and comments welcome. --- End quote --- What's the input voltage range? |
| TheHolyHorse:
This is why mouser digikey etc have parametric search on their websites, just select the parameters you want and you'll get some to choose from :-+ You know your requirements best so I'd encourage you to go to some supplier or manufacturer and play around in the parametric search, I'm sure someone has what you need. |
| Navigation |
| Message Index |