Electronics > Projects, Designs, and Technical Stuff
Part recommendation micro voltage regulator for battery powered stuff
(1/1)
Daque:
I looking for a good inexpensive 3.3v regulator low quiescent current and maybe good for a half amp or one good for 250 ma with an enable pin. Target will be ESP32-Wroom and misc. Maybe using a 2nd one the ESP could turn on would work out better? Thoughts and comments welcome.
aiq25:
--- Quote from: Daque on September 20, 2019, 04:47:06 pm ---I looking for a good inexpensive 3.3v regulator low quiescent current and maybe good for a half amp or one good for 250 ma with an enable pin. Target will be ESP32-Wroom and misc. Maybe using a 2nd one the ESP could turn on would work out better? Thoughts and comments welcome.
--- End quote ---
What's the input voltage range?
TheHolyHorse:
This is why mouser digikey etc have parametric search on their websites, just select the parameters you want and you'll get some to choose from :-+ You know your requirements best so I'd encourage you to go to some supplier or manufacturer and play around in the parametric search, I'm sure someone has what you need.
Navigation
[0] Message Index
Go to full version