EEVblog Electronics Community Forum
Electronics => Projects, Designs, and Technical Stuff => Topic started by: envisionelec on February 13, 2018, 09:27:14 pm
-
I'm looking for a Korean or similar low(er) cost PCB mfg and assembler for a few boards while my usual Chinese suppliers are out having a good time.
I found http://quickturnpcb.co.kr (http://quickturnpcb.co.kr) but it appears they do not assemble the completed PCBs.
Does anyone have some ideas? It doesn't have to be especially fast... 2-3 weeks is ok.
-
You only have to wait a week for the Chinese new year to be fininished!
-
It was a time sensitive project. I found a Korean supplier. Thanks for your help! ^-^
-
Is USA assembly industry hopeless?
Leo
-
Hopelessly expensive and incompetent a lot of the time. I won’t ever deal with a USA company again if I can help it.
-
Hi @ envisionelec I am in the same situation as you are right now. Do you have any recommendation on the PCB manufacturer you ended up using? Thanks
-
Hopelessly expensive and incompetent a lot of the time. I won’t ever deal with a USA company again if I can help it.
LOL, ok even oshpark... they should be that terrible, no idea though, haven´t ever used them...
-
We went with quickturnpcb.co.kr and had an excellent experience. Highly recommended!
-
I am kind of surprised, how are US companies incompetent? They have a few companies that now that have reached off shore pricing....
-
LOL, ok even oshpark... they should be that terrible, no idea though, haven´t ever used them...
OshPark is awesome if all that you need is a two layer board. Great service and quick turnaround. They offer 4-layer boards but not fast.
-
Your reaction is completely understandable. The incompetence to which I refer isn’t their capabilities but their almost indifferent approach to expediency. The Pacific Rim companies absolutely murder US PCB FAB houses when it comes to just getting it done for one-offs. And that - no matter what the cost - is something that brings me back as a repeat customer.
-
The incompetence to which I refer isn’t their capabilities but their almost indifferent approach to expediency.
You guys are lucky. UK companies we worked with are struggling with bare basics.
We have a list of more than 10 UK companies that do assembly for us and to put it bluntly they are all crap. And based on the sample set I conclude that the rest of UK PCB assembly industry is too. Top 3 are only at the top because the others are even worse.
I have posted a few of their attempts in https://www.eevblog.com/forum/manufacture/professional-assembly-mishaps/ (https://www.eevblog.com/forum/manufacture/professional-assembly-mishaps/) but it became so everyday that I have stopped taking pictures. All pictures I have posted were "made in the UK."
Just a week ago a large UK company delivered assembled 2 layer boards with about 15% of the PCBs having non-conductive vias. The vias are 0.3mm drill. To me this is 1980's technology. They have claimed that 0.3mm is a "micro via" and I have, basically, engineered the failure myself by using them on 1.5mm two layer PCB.
And, surely, they... ... stand out... at home and abroad... knowledge and experience... proud British heritage ... home-grown expertise ...no compromises ...
Leo