Electronics > Projects, Designs, and Technical Stuff
Pcb design
(1/1)
sreejith:
I have PCB designed at a size 68*42mm i want to reduce my pcb into a size 50*30mm currently i have place components in 1 side I have just tried 1st time new to pcb can you please guide on how to place components on both sides and how to route iam working in kicad 5.1.2
ratatax:
It's not really different, just switch between F.Cu and B.Cu layers to design both sides (right panel). Flip a component to the other side by selecting it then pressing F, and add Vias to make links between the layers (press V when routing to place a via automatically).
Also, put vias at different places to connect both ground planes via a low impedance path
Navigation
[0] Message Index
Go to full version