| Electronics > Projects, Designs, and Technical Stuff |
| PCB Holder for SMD assembly - 3D Printed edition |
| (1/1) |
| Jay_Diddy_B:
Hi, A few years ago I shared my design for a PCB holder: https://www.eevblog.com/forum/projects/pcb-holder-for-smd-assembly-microscope/msg531502/#msg531502 The original version was built from aluminium and really required a milling machine to make it. Here is an updated version that can be built with a 3D printer. The design was done in Fusion 360, exported to STL and printed in PLA. Photographs 360 Fusion Model The parts were printed with the 1/4- 20 thread. It was necessary to clean the threads with a tap after printing. No other processing was needed. Fusion Files I have attached the Fusion 360 files for anybody who wants to build their own. You may want to change the thread to metric, depending where you live. Regards, Jay_Diddy_B pcb vice.zip (563.59 kB - downloaded 218 times.) |
| Jay_Diddy_B:
Hi, The parts were printed in this orientation: It took about 1.5 hours. Regards, Jay_Diddy_B |
| Nuno_pt:
Very nice work, will print one some as the printer arrive. |
| itdontgo:
Nice :) |
| Navigation |
| Message Index |