Author Topic: Philips LivingColors hack to drive external LED strip  (Read 1966 times)

0 Members and 2 Guests are viewing this topic.

Offline martinLink

  • Contributor
  • Posts: 6
Philips LivingColors hack to drive external LED strip
« on: June 10, 2015, 01:58:17 pm »
Hi guys,

recently I got an Philips LivingColors lamp. I wasn’t too happy with its brightness so I decided to do small hardware modification. I added few N-channel transistors to the LED drivers and connected an RGB LED strip. The effect was soo good that I decided to write a post about the moddification. The single lamp with a strip was able to light up the complete room. The control of the lamp is done via a Philips remote control.


Here is the full article how to modify Philips LivingColors lamp with schematic:
Phlips LivingColors lamp brightness increase with a LED strip

Here is the YouTube movie:


Please let me know what you think about it. Maybe some other stuff can be driven by this 'magic' lamp?:P

Best regards,
Martin

« Last Edit: June 10, 2015, 02:10:34 pm by martinLink »
 


Share me

Digg  Facebook  SlashDot  Delicious  Technorati  Twitter  Google  Yahoo
Smf